3 comments about Glass Construction Manual (Construction Manuals (englisch)).

1. This is a complete compendium of engineering information for the most typical use of glass--as a window. Everything needed to analyze a building's energy budget--at least for the German climate--is presented and well explained, as is daylighting. Atria and double leaf facades are discussed at the end to summarize the principles. There is also a comprehensive section on the mechanical properties of glass: resistance to wind loads, how to attach it, etc.
   Only downside is the quality of the translation (I assume), which results in an occasional unusual sentence: "As no energy can be lost from the total system, the balance of the incident energy must be able to be resolved mathematically."
   Nothing that impairs understanding though.



2. This is one of the better books that I have seen on the topic of curtain wall design. It is full of very accurate amd well explained techincal information as well labeled details. The project section is a comprehensive study of some of the most complex curtain walls built. This section is full of detail drawings and color images of the built details. This is a MUST HAVE book for anyone working on complex wall systems, or anyone interested in the state of the art in curtain wall design.



3. This is one of the better books that I have seen on the topic of curtain wall design. It is full of very accurate amd well explained techincal information as well labeled details. The project section is a comprehensive study of some of the most complex curtain walls built. This section is full of detail drawings and color images of the built details. This is a MUST HAVE book for anyone working on complex wall systems, or anyone interested in the state of the art in curtain wall design.

1 comments about Piet Boon 2.

1. Both monographs on Boon's work are spectacular - he deserves much greater recognition outside of Europe. The level of refinement is unrivaled (and perhaps tough to achieve on less than a hedge-fund baby's salary!). Endless rewards in the detail - hardware, finishes, scale, relationship of interior to exterior are all pitch-perfect.

5 comments about Green By Design: Creating a Home for Sustainable Living.

1. This introductory guide to sustainable living will give you new ideas for building your home in an environmentally-friendly way.



2. I agree with Bill below - this book is outdated. The author seems to miss the concept of ecological footprint. The first two houses she features in her book are 3,300 sq ft (for three people) and 3,000 sq ft (for two people). Another house is 4,175 sq ft.
   
   Even if people use green materials and building practices, the houses aren't green if they're using excessive materials and space.
   
   There are a number of better green books, but one that specifically focuses on minimizing environmental impact is Little House on a Small Planet by Shay Salomon.



3. I am a SoCA tract homeowner getting ready to relocate to the mountains of northern Utah. My husband and I are committed to building a home that is environmentally responsible, but the "green" concept is absolutely overwhelming. Green by Design is a terrific overview of the concept of sustainable living. Through the several case studies we learned that we would not have to be locked into an ugly straw box or uglier geodesic dome, and this book gave us just what we needed for next steps. If you already have expertise in this area and are looking for a how-to, I'm sure there are more appropriate books to help you build your home. However, if you want an introduction, this book does a great job.



4. This book uses a lot of buzz words and offers very little substantial advice when it comes to actually designing your own house. It touches a little on straw bale and reused materials and barely grazes cob/clay/rammed earth. It doesn't even mention geodesic domes as far as I can tell. The book advocates on one page (p.72) that people should live in small humble buildings, only having the square footage they absolutely need. Then a few pages later (p.79) it shows a 4000+ sq. ft. home, with the title "an excersize in efficiency." I fail to see anything efficeint about a 4000 sq. ft. home, especially when it's a standard A-frame building (granted, it's for a family of 6, but then again there's nothing "green" about having 4 children).
   
   It does cover some good stuff like gray-water use, rain collection, alternative heating and cooling, but it glosses over all of this and takes up a lot of space with strange-angled shots of rooms and floor plans. I KNOW the floor plan I want, and there's very little that a floor plan has to do with green building (it's more about orientation to the sun for passive solar use). What I'd prefer to have seen was simple diagrams of how the systems of the house work. There's a spot that explains how one house has the pool hooked up to the AC such that the hot exhaust from the AC heats the pool. Now THAT's something I can get into, but I want more than a couple sentences about it. That deserves a diagram!



5. My 50's Florida ranch style home is in the design stage for major remodel. In the the first "case study" in Green by Design the owner's took a 50's style one bedroom home in Utah and incorporated the foundation and concrete masonry shell into the new design. Exactly my plan. The author uses 14 green design homes as case studies with wonderfully insightful pictures and just the right text to accompany the pictures and to explain "process", "design", "site", "materials", "space", "energy"- all concepts I can use to make my newly remodeled home a certifiable Florida Green Home.
   
   Building Green is NOT about the latest designs and materials as the previous reviewers would have you believe. It's about designing for "sustainable living". Go to floridagreenbuilding.org to find a 5 page checklist of features required to build a green home in Florida. Nothing will get you more points (other than a small home) in this 5 page checklist than not having a permament irrigation system. In fact not having a swimming pool, not living on a natural body of water and not having an attached garage all count toward living "green" in Florida. If you want an up-to-date and "exhaustive resource" buy the latest edition of the "Greenspec Directory"-$89.00 here on Amazon. However the last 5 pages of this book is a list of resources, including the Greenspec Directory and 5 local green building programs. With Florida's now you have 6.
   
   The ultimate green home is a SMALL HOME! In Florida, a 1000 sq. ft. home will get you 50 points (out of 200 required minimum for certification) and a 2000 and above sq. ft. home will get you 0 points. Over 50% of the case study homes in this book would have recieved extra points if they would have been built in Florida. Which brings me to the regional focus of this book. Most of the homes featured where located in western states ( a few were in the northeast) and normally that would disqualify most books for a Florida resident, but not in this case.
   
   I highly recommend this book if you are serious about designing a home for sustainable living.

5 comments about Structures: Or Why Things Don't Fall Down.

1. I'm a starting-out engineer with a degree in aerospace. This is the sort of book that I would've "wanted" to read while in school. I personally haven't had chance to use 90% of what I've learned in school. But this book has opened my eyes to the root of what we do as engineers. Not something that'll get you a better grade in school. Instead, it will motivate you to really learn the most basic and important thing in engineering and to realize how important and crucial what we do at work are. 100% recommended for all my fellow engineering geeks out there!



2. The author, who worked as an aeronautical engineer during the war, was fond of asking his colleages "but shouldn't we put feathers on the wings". That his answer effected an instrument design of my own is strange enough, but it's his persistence in asking such a question well into middle age that is perhaps of higher value. It illustrates the childlike joy that marks the pleasures of engineering. In another example, a drawing of a wing feather showing the quill not centered but close to the leading edge provides a vivid punchline to the story of the development of the mono-plane. How putting struts in the center of their wings made them twist off when pulling out of a dive - resulting in the deaths of many Fokker pilots. He deepens our understanding of shear stresses through examples of form-fitting cocktail dresses made of fabrics cut 'on the bias' - heightening my appreciation both for the human form and Poisson's Ratio. That a book on structural enginnering was a pleasure to read was a surprise. That it was un-put-downable boggles the mind. He enables what we most hope for and least expect from a book: to see the world afresh.



3. I must confess I had a terrible time in the U making my degree in mechanical engineering.. stregth of materials almost made me mad.
   
   But as Twain said it, I have not let my schooling interfere with my education... and this are the books that educate.. for education can only be self-education... this is what I was after in the U and I never received it!!!
   
   I go futher with this assertion, the progress of the US (and some other advanced nations) above all the rest lies in the fact that popularizations of science and technology are readibly accesible to everyone (for all of those who want to use it, of course).. if anyone ever doubts the positive effects of globalization and the internet, I can testify that ever since I can use Amazon I can tap into the resources of knowledge previously denied by geographical barriers and help the system that produces this books.
   
   Getting back to the book, no matter what your schooling is, if you are into design and need to know about structures you cannot go wrong with this wonderful book.



4. I'M PROBABLY THE ODD MAN OUT ON THIS ONE BUT I HAD TROUBLE WADING THROUGH THIS BOOK..IN FACT I THOUGHT THE WRITING STYLE WAS GROPING AND STUMBLING AT BEST. WRITING ABOUT STRUCTURES IN SIMLPE TERMS IS A TOUGH TASK INDEED AND I'M NOT SURE GORDON HAS SUCEEDED HERE. I FOUND THE BOOK TO BE A REAL "YAWNER".
   
   FOR MY MONEY I WOULD BUY SALVADORI'S BOOKS OVER THIS. SALVADORI HAS A KNACK FOR MAKING THE SUBJECT TRULY GRIPPING READING. HIS BOOKS HAVE A MUCH MORE PRACTICAL BENT, AND IMHO THEY ARE WRITTEN MUCH BETTER, NOT TO MENTION THE ILLUSTRATIONS ARE TOP GRADE. TRY STRUCTURE IN ARCHITECTURE OR WHY BUILDINGS STAND UP.
   
   THE 2 STARS ARE FOR GORDON'S DISCUSSION OF STRESS AND STRAIN, THE BEST PART OF THE BOOK FOR ME.



5. The book is indeed good for the layman (I would even say very good), but it lacks rigour and this makes it less usable for professional purposes...
   The author wants to avoid as much math as possible but as a consequence, some explanations contain gaps.
   This book can be seen as an extra to more professional books, everybody will definitely learn something from it and it reads very well...But if you want to have a rigorous understanding of structures, you should buy another book ...

1 comments about Facade Construction Manual (Construction Manuals (englisch)).

1. excellent reference manual as all the books from the DETAIL series,... very recommended

4 comments about Structure as Architecture: A Source Book for Architects and Structural Engineers.

1. If architecture is viewed as ideas of establishing different relationships between people and space, then structure is the first step to achieve these relationship in reality. How do we appropriately use different structure elements in reality, what kind of architectural effects will them create? These questions are answered in Andrew W.Charleson's book 'Structure as architecture'. The book is divided into chapters such as function/exterior/interior of buildings,structural detailing, light and structures and so on, which are discussed from both theoretical and practical approach. With enormous amount of first hand photo illustrations, the book also gives a comprehensive visual case studies to the reader. It is enjoyable to read and I recommend this stunning book to all architectural, building science students as well as architects and engineers in practice.



2. Although Architecture and Engineering are really only different sides of the same coin, they are often treated in completely different ways. Certainly they are normally approached from different directions. Charleson's book addresses this lack of continuity, and reduces structural diagrams down to a simple level (good for architecture students) as well as opening up the ideas of light and air and structure to thoseof a more engineering bent... And from all accounts he's a pretty inspirational lecturer as well, with the students fizzing away with excitement.
   
   End result: if you are a student of Architecture or Engineering, then rush out and buy this book. Invaluable source of knowledge - guaranteed to help you through those exams...



3. As per name, this book provides an excellent reference to building structures that expresses its architectural ideas. The book is well written and provides examples from around the world! ^_^



4. I am a student studying architecture, and have found this book to be a very useful reference.
   
   The first time I used it, I was looking for specific examples of "expressive" architecture. In the index, I found a long list of qualities such as "grounded", "light", "dynamic" etc. with references to pages illustrating specific projects whose structure has those qualities. The clear, full colour photos really help you get the feel of the buildings.
   
   I don't know of any other book that I could have looked to for that purpose. Of course, the content is useful for numerous other reasons as well.

No comments about Toward a New Regionalism: Environmental Architecture in the Pacific Northwest.

3 comments about Build Your Own Stonehenge (Running Press Mini Kits).

1. so much detail went into the creation of this product! I'm so impressed with it I'll be buying it for friends as well! Anyone who loves miniatures will go nuts for this tiny kit!



2. Yes, it's tiny. It's supposed to be tiny, that's the point. The whole thing fits in a tiny box, it's the same with the rest of the Running Press Mini Kits. But, like most of their other kits, this is a lot of fun and really cool. You get a tiny model Stonehenge to build and display in your home/office/whatever. If you're quirky, eccentric, or just into this kind of thing then you'll love this. I do!



3. Pay close attention to the Product Dimensions: 3.2 x 3 x 1.3 inches. It's very small, with TINY pieces.

5 comments about Metric Handbook, Third Edition.

1. I am an Architect dealing with planning and early stages of projects. This book is concise, clear and comprehensive and I don't know what I would do without it. I had a well-used and dog-eared copy from the original edition of 1979 and have just updated to the current edition. The information is easy to find, not over-detailed and still seems to be under the control of one person. Highly recommended and good value.



2. A valuable and a must have book...but print and paper quality is not worth...it is very much like as if phocopied and binded...
   Yagmur TOPRAKLI



3. I'm a graduate design architect, and i've been looking for a design standards reference. I came across this book, i've never heard about it before, as i was more familiar with Time Saver. But i was surprised by how good this book is and how sufficient the information contained is for all stages of design.
   The Time Saver Book might be more comprehensive in some aspects and may also have more examples of different building types. But the price of this book is very good compared to the time saver, which costs much more. I definitely recommend this book...



4. this cd cost 250 dollars, it is a plug-in program for autocad. it creats a new toolbar for autocad users to find images. However, i find this toolbar is NOT frinedly to use and it is hard to find images, and this software can't work in autocad 2000, it just can work with the outdate autocad (r13,R14). Further, this software not ever cover different size of common doors and windows. EDITOR, your CAD-library is not powerful enough. I personally believe this software is only worth 50 dollars.



5. I have been told that there was a review that said that there were errors in the book. This is certainly so, I should know, I am the editor! No reference book as comprehensive as this will ever be perfect. However, if you, the customer, finds one of these, please tell me. My e-mail address is David_Adler@compuserve.com. Thank you.

5 comments about Geodesic Math and How to Use It.

1. I don't like to spend money on information that I can get for free. I found plenty of free information about geodesics on the web, but not enough.
   
   I'm glad I spent the cash. This book filled in all the gaps.
   
   It is not for people with weak math skills.
   
   The book seems confusing at first, but if you keep reading and studying you will be rewarded with a deeper understanding of geodesics than you can imagine.
   
   This book is a "must have" for anyone who wants to build their own dome, or just learn more about geodesics.
   
   And yes, it's worth learning the math skills to understand this book.



2. To paraphrase Barbara Mandrell, geodesic domes were green when green wasn't cool. I read this book in college and was sorely tempted to steal it out of the university library because it had gone out of print and was just not available new or used anywhere else. I kicked myself later for not yielding to temptation when I went to check it out again and realized that someone else stole it before me! Seriously, give Kenner his rightful due, this is a classic in its field. What is my test for saying so? It has been thirty years since the book's first printing and has yet to see its equal. And there have been many many contenders. I could not recommend any one book higher for hobbyist or even professional reference to geodesic calculation and the practical design of geodesic domes. Though Hugh is no longer with us, five years gone as I am writing this, but the effects of his powerful intellect live on and continue to infect others with his inquisitive spirit by way of such seminal work.



3. Seemed over-technical at 1st, but after about a year has been my reference book on geodesics & making all kinds of geodesic domes... It lists chord factors (lengths of segments before applying radius of dome) on tables to 7 decimals for various domes @ the end of the book if you don't want do calculate w/formulas provided. If your familiar with trigonometry, it will let you jump around chapters that are of more interest.
   
   This book was originally copyrighted in 1976, but not edited for this 2nd paperback 2003 Edition (glossy color cover). The author, Hugh Kenner (1923-2003), has compiled a very thorough book. Very well written & explained in orderly fashion with excellent general layout & (especially for the time) detailed diagrams plus cross page-references. IMO there is very little that I would change except for replacing current diagrams with modern CAD generated illustrations, that's about it.
   
   Has 172 pages with several blank pages for notes (I note in the wide margins instead) & is 8.7 x 8.7 x 0.5 inches. Not a small book but not a big bulky one either. Makes for a lot of information handy to store just about anywhere...
   ____________________________________________________________________________________
   
   I found many formulas & shortcuts throughout the book. From Chapter 12 I plotted a 16 frequency (# of divisions making total # of triangles) icosahedron (the typical geodesic polyhedron shape) dome with 3880 chords or "struts". Even made them into arcs for a perfectly round sphere. Chapter 12 has "Using the Tables" with a simple symmetric triangle xyz-grid on a spreadsheet. Each chord calculated does not rely on another chord's result, so chance of error is greatly reduced. Chapter 14 "Truncations" has "Truncation by Rotation", which saves time on calculating the rest of the chords in dome, or moving chords by their symmetry.
   
   This "still nicely" bound book after a lot of use covers tension & tensegrities, subdivisions, great circles, symmetry & breakdowns, choosing a polyhedron, spherical coordinate system, ellipses & superellipses, truncations, space frames & many kinds of angles - plus charts & other resources @ the end.
   
   A free program on the web called Windome is useful to 8 decimals, but lacks input parameters like radius... So I use it to verify chord factors. From 2-16v involving about 12,240 chords plotting all verified (to 15 digits) on 1st try. Besides spreadsheets, formulas can be used in programming like "The R Project", formulas & programs are also written for old Hewlett-Packard HP-35, 21 & 45 series calculators & programs filed with the HP-65 library (circa mid-1970's). I guess it also goes to show Hewlett-Packard has a history in the PC & hardware programming business...
   
   One thing - spherical coordinate symbols for Theta & Phi are switched, though referenced in correct order (check Mathworld). Easy to correct, just read "Phi symbol" as Theta & "Theta symbol" as Phi - references & formulas will be in order. This book was written in mid-1970's, guess more? people then used this as convention.
   ____________________________________________________________________________________
   
   There are many good free sources on the web for geodesic domes & math plotting through Cartesian x,y,z and/or spherical Theta, Phi coordinates using basic trigonometry. This book cost me $13.57 shipped free brand new & is WELL worth it, even after searching the web...
   
   
   A final word of caution on building materials for domes in general: if you use wood make sure you take extra fireproofing precautions, unless it's a temporary frame. 2 domes here in town (on same lot) burnt down before fire department got to them - and they were right down the street! The intense heat from both fires left nothing except the slab & melted everything.
   
   So, when they start to burn there is very little time to exit the structure. As energy efficient as they are, the same design allows for a very efficient combustion, especially with wood stud frames & panels. Other problems arise as well with ventilating interior wood frames to help prevent condensation.
   
   There are many other materials that will not burn that could make up the panels (like from American Ingenuity, Inc.), or even a monolithic concrete pour over a temporary plastic covered geodesic wood frame. Another method that doesn't use geodesics is a "monolithic shotcreted airform dome" (from a company called Monolithic Dome Institute).



4. The subject very well presented and in a way that is easy to understand. Gives the underlying math to be able to use our modern computers setting on our desk tops to go far beyond what one person could do 25 years ago.



5. Well, the time has come for the pirates to take a hike. UC Press is reprinting this book. The information I have indicates both hard and softcover bindings...It will be available this year (2003).

   Geodesic Math and How To Use It is an extremely well written book, and with the NASA papers, forms the "canon of applied geodesic math." It is a great book, well written and useful.